close
Choose Your Site
Global
Social Media
Unlike glass or plastic decorative materials, it resists impact, UV radiation, and weathering, making it suitable for interior/exterior design, signage, and landscape architecture. Available in stainless steel, aluminum, and copper, it balances design flexibility with structural performance, complying with global building standards (e.g., ASTM A36, EN 10025).
Customizable Aesthetic Design: Hole patterns range from simple circles (φ2-20mm) to complex artistic motifs (custom vector files accepted). Open area adjustable from 10% to 60%—10% for privacy screens, 60% for light transmission. A Shanghai hotel used floral-patterned aluminum panels (open area 35%) to create a "light shadow" effect in lobbies.
Durable Weather Resistance: Outdoor-rated materials (316L stainless steel, powder-coated aluminum) withstand UV radiation (no color fading for 10 years) and rain/snow (IP65 protection). Aluminum panels (weight 2.7 kg/m²) resist wind load up to 2.5 kN/m² (hurricane-prone areas); 316L stainless steel resists coastal salt spray (corrosion rate < 0.005mm/year).
Lightweight & Easy Installation: Thickness 0.8mm-3mm, weight 1.5-15 kg/m² (aluminum vs. stainless steel). Panels interlock via hidden clips or bolt to aluminum frames, reducing installation time by 40% vs. stone cladding. A 100m² facade requires only 2 workers and 1 day to install.
Eco-Friendly & Recyclable: Made from 100% recyclable metals (aluminum recycling rate 95%, stainless steel 85%), complying with LEED v4 credits. Surface finishes use low-VOC powder coatings (VOC content < 5g/L), meeting EU 2004/42/EC standards. No formaldehyde or toxic emissions, suitable for indoor environments.
Architectural Facades: Exterior cladding for commercial buildings. A Dubai office tower used 2mm-thick 316L stainless steel panels (hexagonal holes, φ8mm) as facade cladding, reducing solar heat gain by 30% and lowering air conditioning energy use by 20%. The panels withstood 50°C summer temperatures without deformation.
Interior Design: Room dividers and ceiling panels. A New York restaurant installed 1.5mm aluminum panels (geometric patterns) as room dividers, creating private dining areas while maintaining open sightlines. The panels’ acoustic properties reduced noise by 15 dB (measured at 500Hz).
Landscape & Signage: Outdoor screens and branded signage. A Singapore park used powder-coated aluminum panels (custom tree patterns) as sunshades, providing 70% shade coverage and enhancing visitor comfort. Retail stores use backlit copper panels (logo cutouts) for nighttime signage, with 80% light transmission.
Q: Which material is best for outdoor facades?
A: Powder-coated aluminum (cost-effective, lightweight) or 316L stainless steel (high durability). Aluminum panels (cost 30-50/m²) suit most climates; 316L (80-120/m²) is ideal for coastal areas (salt spray resistance). Avoid carbon steel outdoors (rusts in 6 months without coating).
Q: Can custom logos be added to the panels?
A: Yes, laser cutting supports custom logos/text with precision up to 0.1mm. Provide vector files (AI, SVG) for sharp edges; raster images (JPG, PNG) require conversion. Minimum logo size is 50mm × 50mm (smaller sizes lose detail). Customization adds 1-2 working days to lead time.
Q: What’s the maximum panel size for transportation?
A: Standard max size is 2440mm × 1220mm (fits standard shipping containers). Larger sizes (up to 4000mm × 2000mm) require special transportation (flatbed trucks) and may incur extra costs. For large facades, use modular panels (2440×1220mm) joined with hidden seams.
Q: How to maintain outdoor decorative panels?
A: Clean annually with mild detergent and water (avoid abrasive cleaners). For coastal areas, rinse quarterly with fresh water to remove salt deposits. Powder-coated finishes require touch-up with matching paint for scratches (touch-up pens available). 316L stainless steel can be polished to restore shine after 5+ years.
Unlike glass or plastic decorative materials, it resists impact, UV radiation, and weathering, making it suitable for interior/exterior design, signage, and landscape architecture. Available in stainless steel, aluminum, and copper, it balances design flexibility with structural performance, complying with global building standards (e.g., ASTM A36, EN 10025).
Customizable Aesthetic Design: Hole patterns range from simple circles (φ2-20mm) to complex artistic motifs (custom vector files accepted). Open area adjustable from 10% to 60%—10% for privacy screens, 60% for light transmission. A Shanghai hotel used floral-patterned aluminum panels (open area 35%) to create a "light shadow" effect in lobbies.
Durable Weather Resistance: Outdoor-rated materials (316L stainless steel, powder-coated aluminum) withstand UV radiation (no color fading for 10 years) and rain/snow (IP65 protection). Aluminum panels (weight 2.7 kg/m²) resist wind load up to 2.5 kN/m² (hurricane-prone areas); 316L stainless steel resists coastal salt spray (corrosion rate < 0.005mm/year).
Lightweight & Easy Installation: Thickness 0.8mm-3mm, weight 1.5-15 kg/m² (aluminum vs. stainless steel). Panels interlock via hidden clips or bolt to aluminum frames, reducing installation time by 40% vs. stone cladding. A 100m² facade requires only 2 workers and 1 day to install.
Eco-Friendly & Recyclable: Made from 100% recyclable metals (aluminum recycling rate 95%, stainless steel 85%), complying with LEED v4 credits. Surface finishes use low-VOC powder coatings (VOC content < 5g/L), meeting EU 2004/42/EC standards. No formaldehyde or toxic emissions, suitable for indoor environments.
Architectural Facades: Exterior cladding for commercial buildings. A Dubai office tower used 2mm-thick 316L stainless steel panels (hexagonal holes, φ8mm) as facade cladding, reducing solar heat gain by 30% and lowering air conditioning energy use by 20%. The panels withstood 50°C summer temperatures without deformation.
Interior Design: Room dividers and ceiling panels. A New York restaurant installed 1.5mm aluminum panels (geometric patterns) as room dividers, creating private dining areas while maintaining open sightlines. The panels’ acoustic properties reduced noise by 15 dB (measured at 500Hz).
Landscape & Signage: Outdoor screens and branded signage. A Singapore park used powder-coated aluminum panels (custom tree patterns) as sunshades, providing 70% shade coverage and enhancing visitor comfort. Retail stores use backlit copper panels (logo cutouts) for nighttime signage, with 80% light transmission.
Q: Which material is best for outdoor facades?
A: Powder-coated aluminum (cost-effective, lightweight) or 316L stainless steel (high durability). Aluminum panels (cost 30-50/m²) suit most climates; 316L (80-120/m²) is ideal for coastal areas (salt spray resistance). Avoid carbon steel outdoors (rusts in 6 months without coating).
Q: Can custom logos be added to the panels?
A: Yes, laser cutting supports custom logos/text with precision up to 0.1mm. Provide vector files (AI, SVG) for sharp edges; raster images (JPG, PNG) require conversion. Minimum logo size is 50mm × 50mm (smaller sizes lose detail). Customization adds 1-2 working days to lead time.
Q: What’s the maximum panel size for transportation?
A: Standard max size is 2440mm × 1220mm (fits standard shipping containers). Larger sizes (up to 4000mm × 2000mm) require special transportation (flatbed trucks) and may incur extra costs. For large facades, use modular panels (2440×1220mm) joined with hidden seams.
Q: How to maintain outdoor decorative panels?
A: Clean annually with mild detergent and water (avoid abrasive cleaners). For coastal areas, rinse quarterly with fresh water to remove salt deposits. Powder-coated finishes require touch-up with matching paint for scratches (touch-up pens available). 316L stainless steel can be polished to restore shine after 5+ years.
